Contact

0770 886 0 886
Contact Us

Quick Links

  • Home
  • About
  • Contact
  • Articles
  • Automatic Lessons
  • Manual Lessons
  • Female Instructors

    • Resources

  • Intensive Driving Course
  • Driving With 886
  • Professional Driver Training
  • Crash Course
  • Theory Practice
  • Manual Car Lessons
    •

    Maintenance Tips

    Get Started Today

    Book your first lesson with us.

    Frequently asked questions

    Common maintenance tips that every learner should know

    Brakes & Tires

    How would you check the breaks prior to commencing a journey, it is essential to verify the functionality of the brakes to ensure safety on the road.

    The brakes should not exhibit a spongy or loose feel. It is important to test the brakes before driving off. The vehicle should not veer to one side.

    How would you check the tyre pressure and where to check the recommended pressure?
    You can locate the recommended tire pressures for this vehicle in the owner’s manual or on the sticker inside the driver’s side door jamb. To check tire pressures, use a tire pressure gauge to measure the air pressure in each tire and adjust as needed.
    How do you ensuring that your head restraint is properly adjusted is crucial in order to maximize its protective capabilities in the unfortunate event of a crash.

    The headrest should be positioned in a way that the solid part of it is at least level with the eyes or top of the ears, and near the back of the head while still being comfortable. It is important to note that certain head restraints may not have adjustable features.

    How would you inspect the tires to confirm they have adequate tread depth and are in a safe condition for road use.

    The tire must have a consistent 1.6mm tread depth throughout the central three-quarters of its width, as well as around the entire outer circumference, with no cuts or bulges.

    How would you check that you have a safe level of hydraulic brake fluid.
    Ensuring the hydraulic brake fluid is at a safe level can be done by visually inspecting the reservoir and ensuring it falls between the minimum and maximum markings.

    Lights & Hazards

    How would you ensure that the headlights and tail lights are operational without having to leave the vehicle.

    To demonstrate how I would operate the switch, I would first ensure the ignition is turned on if necessary. Following that, I would proceed to walk around the vehicle. Since this is an inquiry-based question, there is no need for me to physically inspect the lights.

    How would you check that the turn signals are functioning properly without having to leave the vehicle.

    Engage the switch (activate the ignition if required), and proceed to inspect the vehicle by walking around it (since this is an inquiry, there is no need to physically examine the lights).

    How to verify the functionality of the brake lights on this vehicle.

    Utilize the brake pedal, utilize reflections in windows or doors, or seek assistance from another individual

    How would you determine whether there is an issue with your anti-lock braking system.
    The ABS Warning light is designed to come on in the event of a malfunction in the anti-lock braking system

    General

    How to check the engine has sufficient engine coolant.

    Open the bonnet and ensure that the engine coolant level is adequate by performing a thorough inspection of the engine and identify high and low level markings.

    How to check your dipped lights and if full beam is on?
    To change your headlight from dipped to main beam, you can typically do so by pushing or pulling the headlight stalk located behind the steering wheel. Once you switch to main beam, you will notice a blue indicator light on your dashboard illuminating, indicating that the main beam is now activated.
    How do you activate the rear fog light(s) and clarify the situations in which you would utilize it/them. There is no need for you to leave the vehicle.
    Activate the switch to engage the dipped headlights and ignition if required. Verify that the warning light is illuminated. Clarify that fog lights should only be used when visibility drops to 100 meters or below.
    How to verify that the power-assisted steering is operational?
    If the steering wheel feels difficult to turn, it may indicate a malfunction in the system. Prior to embarking on a trip, it is advisable to perform two basic inspections. Applying gentle pressure on the steering wheel while starting the engine should lead to a slight, noticeable movement as the system kicks in. Another method is to turn the steering wheel right after beginning to drive, which will promptly show if the power assistance is working properly.